tAc4
tAc4 is a reliable, simple and fast single phase AC meter. It shows four AC parameters Voltage, Current, Wattage, and Power Factor on bright Red LED Display. At a time, it shows only one parameter on the screen and a point LED also indicates the displayed parameter. When user press SET Button then next parameter shown on screen. it has also the facility of auto-scrolling, when user press SET button for 5seconds, tAc4 goes to the auto-scrolling mode and shows all four parameters one by one after a little time delay.
For Example:
If at present, the display shows Voltage then a point LED also glow on the Voltage tab. When user press SET Button, then the display shows Current and a point LED glow on the Current tab and so on.
Technical Specification | |
Auxiliary Power | 180 – 250V, 50Hz |
Input Voltage | 30 – 300V, 50Hz |
Input Current | 50 mA to 5.0 Amp (available up-to 20A) |
Accuracy | Class 1.0 (For electrical parameters) |
Resolution | Floating Decimal Point |
Display | Bright LED Display |
Size | 72mm X 72mm X 84mm |
Connection Diagram
