Loading...
All Products

Videos DTM-1 (Driver Testing Machine)

Videos DTM-1 (Driver Testing Machine)

Detailed video tutorials for the DTM-1 Driver Testing Machine covering various aspects of operation, settings, and advanced features.

1. DTM-1 Introduction with Production Testing

You can view the above video on YouTube at https://www.youtube.com/watch?v=hqOi4DI_iV8

This video contains most of the queries related to DTM-1 like:

  • How to understand the display parameters of DTM-1
  • How to view only the AC parameters
  • How to view only DC parameters
  • How to save data in DTM internal memory and Pen-drive also
  • How to connect load with DTM-1
  • How to test LED Driver or SMPS by DTM-1
  • What are PASS and FAIL status
  • How to know FAIL parameters if DTM-1 shows FAIL status
  • How to set Lower & Upper limits in DTM-1
  • What is Log ON Connect and How to use it
  • Which type of files are generated by DTM-1 in Pen-drive and what is the use of these files

2. DTM-1 Complete Setting Menu Description

You can view the above video on YouTube at https://youtu.be/hKET2IHiyOM

This video contains most of the queries related to DTM-1 settings menu like:

  • How to understand the display parameters of DTM-1
  • What is 2/16 Display Refresh page and How to set its time duration
  • What is 3/16 View Calibration page and How is it beneficial for users
  • What are 4/16 Application page and its different modes
  • What is Production mode and How to set it
  • What is the R&D mode and How to set it
  • What is Data logging mode and How to set it
  • What is 5/16 Model Selection page and How to set & views its parameters
  • What is PASS & FAIL status and How to know its parameters
  • What is 6/16 Model View page and How to use it
  • What is 7/16 Buzzer Type page and How to use it
  • What is 8/16 Judgement Timer page and How to use it
  • What is 9/16 Log ON Connect page and How to use it
  • What is 10/16 Log ON Timing page and How to use it
  • What is 11/16 Log OFF Timing page and How to use it
  • What is THD (Total Harmonic Distortion) and How to overcome it
  • What is 12/16 Serial Number Increments page and How to set it automatically increase or not
  • What is 13/16 Group Test page, How to set group test and Where it is used
  • What is 14/16 Data Log Period page and How to use Datalog period
  • What is 15/16 LOC Fail Option page and How to set Fail parameters included or not in the report sheet
  • What is 16/16 LOG THD Data? page and How to set THD parameters included or not in the report sheet

3. DTM-1 Introduction of Bar Code Scanner

You can view the above video on YouTube at https://youtu.be/vH17a_MZJRg

This video contains most of the queries related to DTM-1 like:

  • How to understand the display parameters of DTM-1
  • How to view only the AC parameters
  • How to view only DC parameters
  • How to test LED Driver or SMPS by DTM-1 using Bar Code Scanner
  • What are PASS and FAIL status
  • What is Log ON Connect and How to use it
  • Which type of files are generated by DTM-1 in Pen-drive and what is the use of these files

4. DTM-1 Introduction Front & Connection

You can view the above video on YouTube at https://youtu.be/yzYm2M5wdMo

This video contains most of the queries related to DTM-1 like:

  • How to understand the display parameters of DTM-1
  • How to view only the AC parameters
  • How to view only DC parameters
  • What are PASS and FAIL status
  • How to connect load with DTM-

5. DTM-1 Parameters and Connection

You can view the above video on YouTube at https://youtu.be/woMoYwfDmbY

This video contains most of the queries related to DTM-1 like:

  • How to understand the display parameters of DTM-1
  • How to connect load or Driver with the machine

6. DTM-1 AC Current Range Selection

You can view the above video on YouTube at https://youtu.be/yOkNrl1SlUs

This video contains most of the queries related to DTM-1 like:

  • How to understand the display parameters of DTM-1
  • How to view only the AC parameters
  • How to select AC current range
  • What is the effect of selection of AC current range

7. DTM-1 LOC (Log On Connect Setting)

You can view the above video on YouTube at https://youtu.be/32o9hWKqKgo

This video contains most of the queries related to DTM-1 like:

  • How to understand the display parameters of DTM-1
  • How to view only the AC parameters
  • How to view only DC parameters
  • How to test LED Driver or SMPS by DTM-1 using LOC setting
  • What is the LOC setting
  • What is Log ON Connect and How to use it

8. DTM-1 Group Test Setting

You can view the above video on YouTube at https://youtu.be/kONL_e_Emv4

This video contains most of the queries related to DTM-1 like:

  • How to understand the display parameters of DTM-1
  • How to set load on different voltages
  • How to set a group test
  • What are PASS and FAIL status

9. Pendrive Process with DTM-1

You can view the above video on YouTube at https://youtu.be/HPusEM8Zqf0

This video contains most of the queries related to DTM-1 like:

  • How to use pen-drive with DTM-1
  • How to take the backup of data
  • How to set date time in the machine
  • Which type of files are generated by DTM-1 in Pen-drive and what is the use of these files

10. Software Installation Complete Guide with DTM-1

You can view the above video on YouTube at https://youtu.be/_2dcl09iayo

This video contains most of the queries related to DTM-1 like:

  • How to install the software
  • How to install drivers or software
  • How to interface meter with software
  • How to use a barcode scanner with software
  • How to log data using the software
  • How to connect software with the meter